China OEM Electric Wire Cable Roll - MC cable electrical wire stranded types of armored cable Copper/Aluminum conductors THHN/XLPE insulation Al armored – Cable

Type MC-Cu

14 AWG through 1000kcmil Copper THHN/THWN-2 Insulated Singles. UL Listed. 600 Volts. Rated VW-1. Lightweight Aluminum Interlocked Armor.

 

 

 

Scope

This specification covers lightweight aluminum interlock armor type MC cable with soft annealed copper solid or stranded conductor,THHN/THWN insulated singles, conforming to Standard 1569 of Underwriters Laboratories, Inc. UL file No.E313205 . 

Application

Type MC cables are suitable for use as follows: branch, feeder and service power distribution in commercial, industrial, institutional, and multi-residential buildings. Power, lighting, control, and signal circuits. Type THHN/THWN conductors are rated 90℃ dry / 75℃ wet. They are permitted for 600V application.  

Conductors: Soft annealed copper .

Sizes:14AWG-1000kcmil. .

Insulation: Flame retardant PVC.  Thickness: per UL83.

Color coding:

 

 

Conductor jacket: Nylon. Thickness: per UL83.

Cabling: Three or more conductors are assembled without fillers and wraped by a polyester binder tape. A marker tape is inserted under the binder tape.

Armor: Aluminum interlock armor is applied over the assembly.

Jacket: A flame retardant PVC jacket is optional.  

Information  on  the  marker tape or the jacket:  AWG or kcmil size,conductor type letters,rated voltage,the name of the manufacturer,UL file number,characteristic,manufacture date,FEET.

Type MC Cable Data1

 

 

 

Type MC Cable Data2

 

 

 Packaging Information: Coils or Reel

——  ——  ——  ——  ——  ——  ——  ——  ——  ——  ——  ——  ——  ——  ——  ——  ——  ——  ——  ——  ——  ——  ——

 

Type MC-Al

6AWG through 1000kcmil Aluminum cross-linked polyethylene XLPE insulation Insulated XHHW-2 Singles. UL Listed. 600 Volts. Rated VW-1. Lightweight Aluminum Interlocked Armor. PVC jacket 

 

 

Scope

This specification covers lightweight aluminum interlock armor type MC cable with Compact strand 8000 series aluminum alloy conductors,cross-linked polyethylene XLPE insulation Insulated XHHW-2 Singles, conforming to Standard 1569 of Underwriters Laboratories, Inc. UL file No.E313205 . 

Application

Type MC cables Suitable for use in branch, feeder and service power distribution under high ambient temperature in commercial, industrial, institutional, casinos and multi-residential buildings; for power, lighting, control and signal circuits; in concealed or exposed installations; in environmental air-handling spaces per NEC 300.22; in places of assembly per NEC 518.4 and theaters per NEC 520.5; in aerial applications when attached to a messenger; for installation in cable tray and approved raceways; under raised floors for IT equipment per NEC 645.5(D) and 645.5(D)(2); Class I Div 2, Class II Div 2, Class III Div 1 hazardous locations. 

Conductors: Compact strand 8000 series aluminum alloy conductors

Sizes:6AWG-1000kcmil.

Insulation: Color coded cross-linked polyethylene XLPE insulation. The cable ground is either bare or has green insulation. Thickness: per UL44.

Color coding:

 

 

Cabling: Three or more conductors are assembled without fillers and wraped by a polyester binder tape. A marker tape is inserted under the binder tape.

Armor: Aluminum interlock armor is applied over the assembly.

Jacket: An overall black polyvinyl chloride PVC jacket, which is heat, moisture and sunlight resistant.  

Information  on  the  marker tape or the jacket:  AWG or kcmil size, conductor type letters, rated voltage, the name of the manufacturer, UL file number, characteristic, manufacture date, FEET.

Type Aluminum Conductor–Jacketed MC Cable Data

 

 

Packaging Information: Coils or Reel

 

 

 

 

 

 

Founded in 1950, Qingdao Cable Co., Ltd.,former Qingdao Cable Works, has the experience of more than 60 years in the production of wires and cables, with the registered trademark of “Qing Kai”,”Qing Lan”.

 

 

As the Enterprise of High and New Technology of China, Qingdao Cable Co., Ltd. Has been manufacturing high quality products with the advanced equipments and complete inspection instruments. The company has been awarded the certificate of approval of ISO9001, ISO14001, OHSAS18000, and has been certified by the multinational companies of GE, Motorola, etc. Several kinds of products are listed by American UL and Chinese CCC. The company can produce and develop products in accordance with such standards as GB, IEC, UL, JS, VDE, SAE, and the purchasers’ requirement as well.

 

 

(1) When can I get a response?

We will reply to your inquiry as soon as possible, usually within 6 hours. You can call us directly if it is urgent.

(2). How can I get a sample?

you can require for samples after price confirmation. Samples in stock are free of charge, but the freight charge should be paid.

(3). What about the lead time for mass production? 

It depends on the order quantity, the distance of transportation and so on. We suggest that you start inquiry two months before the date you would like to get the products at your country.

 

Please contact us for details about lead time and other issues.

We look forward to sincere cooperation with you!